Fire resistance
High Waterproofing
Resilient
SUITABLE FOR:
– Internal scenography
– External scenography
– Indoor furniture
– EPS coating
– Theme Parks
Notes: In case of aesthetic applications, finishing should be done with an aliphatic polyurethane paint
ADVANTAGES & BENEFITS:
– Fast set curing system (10-12 sec gel time)
– Seamless coating
– No VOC’S and no odors
– It can be painted after 5-10 min.
– It can be demolded after 5 min (with mold release agent)
– Ambient moisture insensitive during application
– Application until -10°C (-14°F) on site
SUBSTRATES:
Concrete, steel, iron, wood, PUR foam, EPS/XPS (Expanded/Extruded Polystyrene), EPE (Expanded Polyethylene), EPP (Expanded Polypropylene), geotextile non-woven, fibers glass.
HOW TO APPLY
Spraying or pouring with a suitable high pressure and high temperature plural component equipment.
SUBSTRATES PREPARATION
Concrete:
Before application check surface must be dry (internal moisture not above 5%), cleaned and structurally sound. In case of new concrete level the surface using epoxy mortar and check the surface must be without bugholes. Do not apply PUA before 28 days from casting of concrete. In case of application on new or to restore ground floor be sure of the presence of a vapor barrier.
Steel or wood:
Surface must be cleaned, dry and with coarse profile (sandblasting or shotblasting).
PUR foam, EPS/XPS (Expanded/Extruded Polystyrene):
Direct application.
EPE (Expanded Polyethylene), EPP (Expanded Polypropylene):
Special treatments required.
For other kind of surfaces please contact our technical office. In any case (except old asphalt layers supports) we suggest to apply a thin layer of epoxy or polyurethane primer.
